Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

Last Updated: 18.06.2025 00:10

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

What is lightning?

An AC voltage/ current source, and an ac inductive load.

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

How do people break a narcissist man's ego?

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

Here is a simplified AC power diagram.

He then asserts :

What is the dirtiest city in India?

[image of Common-mode choke]

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

nine

Has a cop ever said something to you which was completely unexpected?

Barnstars:

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

MATCH RECAP: Inter Miami CF Debuts in FIFA Club World Cup 2025 Opener, Earns Draw Against Al Ahly FC - Inter Miami CF

There are two important concepts here.

These devices are installed between the “hot” and “neutral” and protective ground.

But… the neutral is now “floating” because of the 1 ohm resistance.

If the Red Pill is supposed to be so bad, why are so many young men buying into it? What about Red Pill makes it appealing to them?

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

Now when you have a certain ac resistance, then a current flows in a loop.

Harvard gastroenterologist shares 4 bloat-busting tricks that actually work - Times of India

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

(Dc diagram shown, AC is similar).

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

Researchers raise red flag that doctors may be underprepared for devastating new disease emerging in US: 'We want to give the early warning' - Yahoo

but this device (an Inductor) … impedes the rapid changes in the current.

the problem then depends on "how fast does the fuse operate?".

One

How can you tell if someone is cunning?

Edit 2024–10.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

He then describes Rainy Season and Lightning.

Is it possible to become homeless after being released from jail or prison in the United States?

The MOV will conduct when the voltage exceeds 50% of line voltage.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

This device then solves the entire problem.

When I buy a house, do I automatically own all items the previous owner failed to remove from the property?

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

A circuit breaker is similar, but is resettable.

What are the best examples of reverse psychology?

This is where this question deviates from being a 'generic' question, and becomes more specific.

First Sentence:

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

Why do people always talk about Ohio as it's a dangerous city?

But it can get overloaded, and no longer works.

2024–10–14 [Omar Gharbi Omar Gharbi ]

It seems Mohan does not understand the difference between a comment and an Answer.

My boyfriend won’t tell me his past and it hurts me so I broke up with him what do I do?

2024–10–16 [ OO OLAOYE OYEBODE ]

Upvotes:

This one hit behind the barn.

What are some ways to cope with paranoid thoughts about being gangstalked or targeted individuals?

It also is a device that limits the change in current flow.

I post the exact comment here.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

Newspaper headlines: 'A generation let down' and 'Israel claims control' - BBC

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

This is where the MOV conducts again, and dissipated the energy.

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).

There are three different concepts here that are getting confused.

For this case there are devices called Metal oxide varistors (MOV).

eight

One is “what exactly is in a ‘surge protector’ ? ”

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

[old diagram got deleted by accident]

At one ohm, the resistor has a maximum of 1 watt power.

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

so, what happens?

what exactly is a ‘surge’ protector?

This is 'the assistant's answer'

a photo is worth a thousand words.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

He then describes the function of a fuse.

The bolt then partially travels down the line to your home.

These are simplified answers to the original question, and does not change anything I wrote above.

At least they know the answer if they wanted it.

So, the voltage could go up to 500 volts, and the fuse will not open up.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

The third is lightning and “how it gets conducted into a home.”

but I think this circuit , shows a few more pieces.

A fuse is a non-resetable over current circuit protector.

The other is “what does a “fuse” do?”

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Because the load is inductive, the current lags the voltage.(by a bit).

2024–10–10[John johnson John Johnson ]

What does a fuse do?

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

In schematic diagrams this is the symbol for a fuse: